FESTO I/O module CPX-E-4IOL 4080495 1 pc(s)
Additional technical information: Dimensions W x L x H: 18.9 mm x 76.6 mm x 124.3 mmFuse (short circuit): Internal electronic fuse, load per channelInternal electronic fuse, sensor per moduleMounting type: With DIN railCE mark (see declaration of conformity): According to EU EMC directiveDiagnostics via bus: Device missing/failedWire breakModule errorShort circuitParameter errorUnderflow/overflowUndervoltageGeneral errorDiagnostics via LED: Errors per moduleStatus per channelInternal power consumption at rated operating voltage of electronics/sensors: Type. 50 mAInternal power consumption at rated operating voltage load: Type. 15 mAElectrical connection IO-Link, connection type: 4x terminal stripElectrical connection IO-Link, connection technology: Spring-loaded terminalElectrical connection IO-Link, number of poles/wires: 6Electrical connection IO-Link, note for conductor cross-section: 0.2 - 2.5 mm² for conductor flexible without wire-end sleeveElectrical connection IO-Link, conductor cross-section: 0.2 ... 1.5 mm2Note on ambient temperature: -5 - 50 °C for horizontal installationIO-Link, number of ports: 4IO-Link, communication: C/Q LED greenIO-Link, communication mode: Software configurableSIO, COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud)IO-Link, minimum cycle time: Depends on the minimum supported cycle time of the connected IO-Link deviceIO-Link, port type: BIO-Link, protocol: Master V 1.1IO-Link, process data width IN: Parameterizable 8 - 32 bytesIO-Link, process data width OUT: Parameterizable 8 - 32 bytesChannel parameters: Force channel x.Disable Actuator SupplyDevice error codeChannel modeChannel statusCycle timeCorrosion resistance class KBK: 0 - no corrosion stressStorage temperature: -20 ... 70 °CModule parameters: Diagnostics short-circuit actuator supplyBehavior after short circuit/overloadDisable sensor supplyNominal operating voltage DC outputs: 24 V.Nominal operating voltage DC electronics/sensors: 24 V.Potential separation channel - internal bus: No.Potential separation channel - channel: No.Product weight: 96 gProtocol: IO-LinkPitch: 18.9 mmRelative humidity 95%not condensingShock resistance: Shock test with sharpness 1 according to FN 942017-5 and EN 60068-2-27Protection against direct and indirect contact: Functional extra-low voltage with safe separation (PELV)Protection class: IP20Vibration resistance: Transport application test with sharpening degree 1 according to FN 942017-4 and EN 60068-2-6Power supply, connection type: Terminal stripPower supply, connection technology: Spring-loaded terminalPower supply, number of poles/wires: 4Power supply, note for conductor cross-section: 0.2 - 2.5 mm² for conductor flexible without wire-end sleevePower supply, conductor cross-section: 0.2 ... 1.5 mm2Ambient temperature: -5 ... 50 °CMaterial housing: PAMaterial note: Substances containing labs containComplies with RoHSPermissible voltage fluctuations Outputs: ± 25 %Permissible voltage fluctuations electronics/sensors: ± 25 %Approval: RCM Mark; Ambient temperature (max.): +50 °C; Min. ambient temperature: -5 °C