The cylinder signal is used to signal on the stroke of cylinders contact-free pneumatic. It is by means of a hollow screw screwed directly into the compressed air connector of the cylinder.At the stroke end of the cylinder through the decaying bleed pressure in the cylinder chamber the pending signal at 10 deleted and the passage from 1 to 2. With increasing pressure at10 is output 2 depressurised. This signal is available at until the pressure in the cylinder chamber increases.Cylinder signalling PPL-1/4 material note = RoHS compliant, according to ISO 8573-1:2010 operating medium = compressed air [7:4:4] Note for the operating and control medium = oiled operation possibleThis text is machine translated.