FDG71L-230V Eltako Gateway Surface-mount
Wireless DALI gateway, bidirectional. Standby loss 2 watts. Installation, for example, in suspended ceilings and lights. 252mm long, 46mm wide and 31mm deep. With cable strain relief. Supply voltage 230V at terminals N and L. 16V DC/130mA are provided at terminals DALI +/- for up to 64 DALI devices. The FDG71L gateway is used to control DALI devices with EnOcean radio transmitters. Groups 0-15 can be activated and the broadcast command can also be issued. The DALI scenes 0-15 can also be called up. DALI installations that are to be fully controlled with the FDG71L must therefore be configured in groups 0-15. The configuration software or control modules for this are offered by well-known manufacturers of DALI components (e.g. Tridonic DALI XC). The FGD71L internally stores the dimming value for each of the groups 0-15 and provides this value as feedback. The same message telegrams are generated as for a FUD71. The feedback signals of the device addresses correspond in ascending order to the dimming values of DALI groups 0-15. The feedback signals can be individually switched from dimming value message frame (%) to pushbutton message frame (on/off) per group with PCT14. Actuators can thus be controlled with the feedback signals. The FDG71L fulfills the functions of the DALI master and the DALI power supply. Caution: Pushbuttons always require a double-click when manually programming to the FDG71L! For CLR, one single click is sufficient. A direction key or universal key with the same ID and the same key cannot be programd several times Âin different groups. The last selected group always applies. A button can therefore switch only one group or all groups with broadcast. One FBH can also be taught in per group. With manual teaching, this always has a brightness independant effect. With PCT14 you can also set the brightness threshold. The delay time for switching off after non-motion can be set together in minutes (1..60) for the FSH of all groups. Default is 3 minutes.This text is machine translated.