FAE14LPR Eltako RS485 Actuator 2-channel DIN rail Switching capacity (max) 1000 W
Single room control with 2 channels, 4A/250V, potential-free. Bidirectional. Stand-by loss only 0.1 watt. Connection to the Eltako RS485 bus. Cross-wiring bus and power supply with jumper. If both relays are switched on, 0.4 watt is required. The channels can either be taught in the same way together, the lower rotary switch in position 1+2, or completely separately in positions 1 or 2. The rotary switches are used to teach in the sensors first. If a radio button is taught in, the assignment of the 4 buttons is permanently assigned. The LED below the upper rotary switch accompanies the programming process according to the operating instructions and indicates control commands during operation by short flashing.This text is machine translated.