F4FT65B-wg Eltako Wireless Pushbutton Surface-mount Max range (open field) 30 m
4-channel flat button, pure white, for single mounting 84x84x11mm over a switch box or mounting in the E-Design65 switch system. Very quiet and with battery (service life 5-8 years). With rocker and double rocker. Smart home sensor The delivery package includes a holding plate with locking-in electronics, a frame RF1E, a rocker and a double rocker. Wireless switches with a rocker can send two evaluable signals: Press the rocker up and press the rocker down. Wireless switches with a double rocker can send four signals: Press two rockers at the top and bottom. The holding plate can be screwed onto a level surface or glued to the wall, glass or furniture using the enclosed adhesive film. The sleeves in the box are used for screw fastening over a 55 mm switch box. Clip on the large rocker so that its marks 0 and I on the rear match the radio module. Installation only on a flat surface: Screw on or glue the holding plate. First pull out the electronics and then the frame, and then pull out the battery insulation. When putting on the rocker, the marking 0 on the back must always be on top. The electronics contained in the radio button can be imported encrypted in all encrypted actuators of the series 61 and 71, as well as in the FAM14 according to instructions of use.This text is machine translated.