F1FT65-wg Eltako Wireless Pushbutton Surface-mount Max range (open field) 30 m
Radio 1-channel flat button pure white shining for single mounting 84x84x11mm or mounting in the E-Design65 switch system. Generates the energy for radio telegrams even when pressing a button, therefore without connecting cable and no loss of standby power. Smart home sensor The scope of delivery includes the frame RF1E, a rocker, a mounting frame, a retaining plate, the radio module and an adhesive film. Wireless flat switches with a rocker can send an evaluable signal: Press the rocker at the bottom of the marking. The holding plate can be screwed onto a level surface or glued to the wall, glass or furniture using the enclosed adhesive film. The sleeves in the box are used for screw fastening over a 55 mm switch box. Before screwing, pull off the rocker and remove the frame from the retaining plate. Then screw on the retaining plate - with the top marking on top -. Snap the frame and the rocker back on.This text is machine translated.