Enduro Pro Bearing Puller BBT-222
Enduro -
The new BBT-222 Stainless Pro Bearing Extractor features full stainless-steel construction, using a smooth-rod and slide-handle to extract difficult to remove bearings. The 9 blind collet extractor tools range in size from 6-32mm and allow removal of bearings that cannot be driven out from the backside. The added thread-on mallet adapter features interchangeable mallet tip interface, and the reverse side is a 1” socket holder for cassette lockring tools. Hammer slide and slide rod made from stainless steel Blind collet extractors in 9 sizes made from hardened stainless steel Screw on mallet head with 2 mallet tips, 1 brass and 1 soft polyurethane The other side of the mallet interface includes a 25.4mm (1”inch) socket for cassette lock-ring tools. This is pocketed with magnets to hold the lock-ring tool in place Slide rod has a 6mm hex head to tighten or loosen the mallet interface Contents: 1 - 11.25” (286mm) Stainless Steel Slide Rod with handle 1 - Thread-on Mallet adapter with a 1” (25.4mm) socket holder for cassette lockring tools 1 - 1.5” medium hardness polyurethane mallet tip 1 - 1.5” brass mallet tip 1 - 6-7mm blind collet extractor 1 - 8-9mm blind collet extractor 1 - 10-11mm blind collet extractor 1 - 12-13mm blind collet extractor 1 - 15-16mm blind collet extractor 1 - 17-18mm blind collet extractor 1 - 20-21mm blind collet extractor 1 - 24-25mm blind collet extractor 1 - 30-32mm blind collet extractor 1 - Pro Tool Roll pouch