Encoder 24 24 V AC V DC (max) Metz Connect 110731 1 pc(s)
The analog encoder is used for manual manipulated variable setting, e.g. for mixing flaps, valve positions, temperature values, etc. The module can be controlled with two operating modes that are set with the three-stage switch (ON, OFF, AUTO) on the front. The switch position is signaled via the external control contact terminals B1 and B2. Switch position ON: The manipulated variable can be adjusted using the front potentiometer. The output signal 0 to 20 mA is available at clamp Y. The current flow at input YR is not interrupted when the switch is set to ON / OFF. Switch position AUTO: The input current (YR) is transferred to manipulated variable output Y with a tolerance of ± 5% (scale end value). , Connection with spring-loaded terminals (push-in), setpoint generator, manual operating level with feedback signal, LED brightness proportional to the manipulated variable.This text is machine translated.