Encoder 24 24 V AC V DC (max) Metz Connect 11073001 1 pc(s)
The analog encoder is used for manual manipulated variable setting, e.g. for mixing flaps, valve positions, temperature values, etc. The module can be controlled with two operating modes that are set with the three-stage switch (ON, OFF, AUTO) on the front. The switch position is signaled via the external control contact terminals B1 and B2. Switch position ON: The manipulated variable can be adjusted using the front potentiometer. The output signal 0 to 10 V is available at terminal Y. Switch position AUTO: The manipulated variable is switched to manipulated variable output Y without changing via the YR terminal. , Connection with spring-force terminals (push-in), setpoint generator, manual operating level with feedback signal, LED brightness proportional to the manipulated variable, reverse voltage safe.This text is machine translated.