Encoder 24 24 V AC V DC (max) Metz Connect 110660 1 pc(s)
The analog encoder serves as an manipulated variable encoder for manual manipulated variable specification, e.g. Mixing flaps, valve positions, temperature values, etc. The module can be controlled with two modes of operation, which can be switched by means of the integrated two-stage switch (MANUAL, AUTO). The switch position is reported back via the external control contact terminals S1 and S2. Switch position MANUAL: The manipulated variable can be adjusted by means of the front potentiometer. The output signal 0 ... 10 V is available at terminal Y Switch position AUTO: The manipulated variable is switched to manipulated variable output Y without changing via the YR terminal, setpoint generator, manual operating level with feedback, LED brightness proportional to the manipulated variable.This text is machine translated.