Eltako WSZ110DSS-16A+PRCD MID Portable electricity meter 1 pc(s)
Mobile alternating current counter with safety plug and earthing contact coupler. With additional personal protection intermediate switch PRCD 30mA. Suitable for indoor and outdoor use. Maximum current 16A. Standby loss of only 0.4 watt. Housing dimensions 110X70x35mm, connection cable 1.5m (incl. Plug and coupling). Accuracy class B (1%). This mobile alternating current counter measures the active energy on the basis of the current flowing between the input and the output. The intrinsic consumption of only up to 0.4 watt effective power is not measured and not displayed. Every 30 seconds the display switches for 5 seconds from the accumulated active energy in kWh to the current consumption in Watt. The starting current is 20 mA. The display can only be read with the power supply. Consumption, however, is non-volatile and is immediately displayed after a power failure. The digital display has 7 digits. Up to 99999.99 kWh, two decimal places are displayed. Only one after 100000.0 kWh. The power reference is indicated by a LED flashing 2000 times per kWh. The personal protection intermediate switch PRCD detects fault currents, which e.g. when touching a faulty electrical device and interrupts the current so quickly that lethal accidents can be prevented. It also has an under-voltage trigger, which switches-off in the event of a failure of the mains voltage. With function display and test circuit. Technical data: Operating voltage 230V, 50Hz, extended range -20%/+15%. Rated current 16A Counter current range: Reference current Iref (limiting current Imax): 0.25-5(32)A. Own consumption of active power: 0.4W. Display: LC display 7 digits, of which 1 or 2 decimal places. Accuracy class for ±1%: B. Starting current according to accuracy class B: 20mA. Operating temperature -25/+55°C. Protection class of housing: LP54, plug and coupling: IP44. Cable cross-section: 3x2.5mm². Cable length incl. Plug and coupling: 1.50m. Mechanical environmental conditions: Class M1. Electromagnetic environment: Class E2. Person-protection-intermediate switch (PRCD). Protection class IP66. Trigger current 30mA. Trip time: 30ms.This text is machine translated.