Eltako FSNT14-12V/12W Rail mounted PSU (DIN) 1 A 12 W No of outputs:1 x Content 1 pc(s)
Switched PSU Stand-by loss only 0.2 watt. If the total power requirement of a Baureihe14 bus system is higher than 8W, further switching power supplies are required. These must not be connected in parallel, but supply a group of actuators each, which are separated by a separation bridge on the FSNT14. The delivery includes 1 separating bridge TB14 1 TE, 1 jumper 1.5 TE and a spacer DS14. At a load greater than 50% of the rated power and always with switched-mode power supplies and dimmers lying next to each other, a 1/2 division unit ventilation distance with the spacers DS14 is required. This and a long jumper are included. Efficiency 83% Stabilized output voltage ±1%, low ripple. Short-circuit-proof. Overload and over-temperature protection by switching off with automatic switching on after troubleshooting (auto-recovery function). This switching power supply can also be used to create redundancy. For this purpose, only 1 FSNT14 may be connected in parallel to the integrated power supplies in the FAM14 and FTS14KS and connected with a normal jumper. The FSNT14 should be placed next to the last actuator in the bus for optimum load distribution.This text is machine translated.