Eltako Corded discharged air control ETR61NP-230V+FK 2500 W
Cut relay 230V with window contact FK. 1 NO contact non-potential-free 10A/250V AC. With window contact. Stand-by loss only 0.5 watts. For panel mounting. 45mm long, 45mm wide, 18mm deep. The latest hybrid technology combines the advantages of wear-free electronic control with the high power of special relays. Control input with internally generated low voltage 24V DC. With an isolating transformer galvanically separated from the power supply and the work contact (PELV). Therefore, no external low-voltage power supply is required. With two L-terminals and 2 N-terminals for easy and quick installation. Power supply 230V. The enclosed window contact consists of a reed relay with connection terminals and a magnet. The normally closed contact opens as soon as the magnet is closer than 25mm. Connected to terminals T1 and T2 of the ETR61NP isolating relay, the power supply of a vapor cable is switched on as long as the window is open. The ETR61NP can be placed in the flush-mounted socket behind the outlet for the extractor. Mounting the window contact FK: Lever out the inserts on the narrow side of the housing. Connect the reed relay and cut out the housing cut-out for the line. Glue both housings together in parallel at a distance of up to 15mm and screw them on if necessary. In the longitudinal direction, the magnet can be rotated in any direction opposite to the reed relay.This text is machine translated.