Einhell Einhell Mauernutfräse TE-MA 1700 4350740 Wall chaser 150 mm incl bag 1700 W 240 V
The wall nut cutter TE-MA 1700 cuts horizontal and vertical grooves and channels for cables or similar into the masonry. Compared to working with pure muscle strength in combination with hammer and chisel, the milling cutter is recommended for all milling work on hard materials due to time and effort savings alone. The wall nut cutter creates dimensioned cuts or grooves in masonry by two parallel cutting discs with 1700 watts. The recess for cables, for example, is carved out after the rough work with a hammer or other suitable tool. The very powerful motor ensures the best milling results in use, the stepless cutting depth setting and the individual cutting width setting for narrow and wide grooves enable maximum flexibility. The large handle bar ensures easy and safe operation. The safe application is supported by the soft start and the pulling cut. The overload protection ensures the long life and the protection of the user. The guide roller and the additional handle support the comfortable handling by a firm, secure grip. The marking of the cutting disc position allows precise positioning of the device and measured cuts. The wall nut cutter has a spindle lock for easy disc change. Thanks to the extraction adapter, the wall nut cutter is compatible with the Einhell wet/dry vacuum cleaner. The 4 meter long cable ensures a large operating radius in use.This text is machine translated.