EUD62NPN-IPM/110-240V Eltako Dimmer actuator Flush mount
Universal dimming actuator IP via Wi-Fi. Matter-certified, REST API. With Power MOSFET. Dimmable 230V LED lamps in the phase section up to 300W operating mode or in the phase section up to 100W operating mode, depending on the ventilation conditions. 230V - bulbs and halogen lamps up to 300W, depending on the ventilation conditions. No minimum load. Standby loss of only 0.7 watt. For panel mounting. 49x5mm, 25mm deep. The terminals are plug-in terminals for conductor cross-sections from 0.2mm² to 2.5mm². Switch with soft on and soft off for protecting the lamp. Supply, switching and control voltage locally 110-240V. The adjusted brightness level is saved when turning it off (MEMORY) When the supply voltage fails, a defined shutdown is performed. Automatic electronic overload protection and overheating shut-off. With control input for a conventional mains voltage control button that may be installed before. A glow lamp current is not permitted. The Wi-Fi connection uses the 2.4 GHz frequency band and enables over the air updates (OTA). This actuator is Matter certified and can therefore be trained in different ecosystems and operated in parallel. For control via Matter, a compatible Matter controller is required for each ecosystem. For Apple home, for instance, a home pod mini, for Amazon Alexa as e.g. a compatible echo dot and for Google HOME e.g. a Nest mini. The optional configuration of the actuator is via the Eltako connect app. A development version of the REST API is available from the device's online product page. This is being developed further on an ongoing basis.This text is machine translated.