Digitus DN-949103 FTTH junction box set Grey 1 pc(s)
The HHP is made up of a 3-piece housing. The bottom plate is fixed at the desired location and thus provides for a free working in the distributor. The cable can be placed and fixed without problems via the intelligent cable management. The bottom plate has an additional PLC splitter holder as well as various cable entry options. Two eruptions on the floor plate allow the insertion of 7mm or 12mm microducts. The head mounting on the base plate offers place for a splice holder, which by any splice or splice box Heat shrink sleeves can be replaced. The place of the base plate as well as the crimp holder can be used for a feed-through. The second attachment includes the versatile splice box, which offers space for 24 fibers with a receptacle of up to 12 couplings. The twelve outbreaks can be fitted with up to 12 LC duplex, 12 SC simplex or 12 E-2000® couplings. The two head sockets in the splice box are equipped with two crimp splice holders for twelve fibers each. These can be replaced with the common splice or shrink sockets. Finally, the wall housing is protected by a long cover, which prevents access by the participant. The lid can also be locked via the installed cylinder lock. There is a device at the side for sealing the splice box.This text is machine translated.