Chauvin Arnoux P01191306 CA 6651 1 pc(s)
The test adapter for E-charging stations CA 6651 is easy to use: It is simply connected to the charging plug of the charging station, simulates an E-vehicle and thus enables you to access the different terminals of a charging cable type 2, in order to carry out the corresponding electrical tests. With the CA 6651, you can first perform the following tests:- Operational test to check that the earth (PE) is actually connected to earth and that all three phases are present.- Checking the electrical safety of the charging connector for an electric vehicle. To do this, you must connect a multifunctional installation tester to the test adapter, e.g. a CA 6117, CA 6131 or CA 6133: Mains connection test, testing of the earthing, testing of the residual current protective device, insulation measurement.The CA 6651 then checks that the charging station is functioning correctly by simulating a connected electric vehicle and the various states: No electric vehicle connected, electric vehicle connected, electric vehicle charging â¦In order to check the correct signal transmission between the charging station and CA 6651, you must have a scope of the type hand scope (waveform, amplitude, pulse length, etc.â¦).This text is machine translated.