Brodit 712224 Car mobile phone holder Charging function
Active holder with zig-plugSuitable for devices with original skin / skin. With tilting pan. With Easy-Switching-System.Keep your Galaxy Tab Active in an active holder so that you always have a freshly charged battery! In addition, it is neat, comfortable and safe. The holder has a zig-zg plug for connection to the 12/24 volt socket of the vehicle. 3a charging. Charging via the Pogo-connection.The holder is equipped with a tilting swivel so that you can easily adjust the angle to look good on the screen. 17 ° angled and can be rotated by 360 °. Mounting plate 42x50 mm with 4 mm AMPS holes. Made of black ABS / Acetal plastic. Made in Sweden.Simple switchable system:With the Easy-Switching-System you can only upgrade the holder and have the cables installed. This saves you a lot of time! When you upgrade to a new device, you no longer need to perform a full installation. Simply disconnect the holder from the charging cable via the 6-pin Molex quick connection and then connect the new holder. The change is completed in a few seconds.Tablets should not be mounted on a dashboard if they obstruct the view or block important controls. ProClip (Brodit's holder for vehicles) is suitable for mounting smaller devices such as mobile phones and GPS devices. ProClip is not suitable for heavy devices such as tablets. In some cars the ProClip is particularly stable and can then also be used for mounting a tablet. If you want to place a tablet on the dashboard of the car, you must carefully check each Tablet-Auto combination to see if it can be mounted on a case-by-case basis. Then consider the location and stability of ProClip and the size of the tablet you want to use. Brodit does not make recommendations for such assemblies.This text is machine translated.