Ethernet over Coax - as simple as a switch!The EOC-devices develop by the help of the G.hn standard an encrypted Ethernet over coaxial network via the coaxial cable of the TV cabling (television and radio are of course transmitted). This EOC network acts like a large, house-distributed switch (in the example with 8 ports). Two Ethernet-enabled devices (PCs, notebooks, servers, printers, smart TVs and much more) can be connected to each EOC device. In addition, the EOC 2-32 is equipped with WLAN. EOC 1-32 and EOC 2-32 use the return channel range from 5 to 204 MHz and achieve a net data rate of 1800 Mbps (PHY) due to the bandwidth. This is possible with a SAT receiver system without any problems. In the CATV network, however, only if the forward travel frequency range is off258 MHz. Typical scenarios may be residential buildings with satellite television, law firms, medical practices or offices where LAN wiring is not possible or desired.This text is machine translated.