Arducam Camera unit MBS-SES-185-04
The ArduCAM team has released a number of camera modules for the Raspberry Pi, including 5MP and 8MP modules. They are fully compatible with the official version and are divided into standard version, optimized optical power version, miniature spy camera version, noir version, motorized IR cut version and programmable motorized focus camera version. These camera modules support all Raspberry Pi models and require a 15-to-22-pin cable or an adapter to work with the Pi Zero. The product ArduCAM 5 MP CS Pi Cam is an add-on camera module supplied by Revision C. It is fully compatible with the official Raspberry Pi Board. The CS-mount lens lets you focus better and has the option to change the lenses (telephoto lens, fish eye or other M12 lenses fit). Thus, the optical power is optimized. The camera provides FREX and STROBE signals, they can be used with correct camera driver firmware to synchronize multiple cameras. The camera can be installed on Rasparian OS and the raspististill and raspivid terminal programs.  Connection to the Raspberry Pi is performed via one of the two connectors on the top of the board. This interface uses a dedicated CSI interface. This was specially developed for connecting cameras. The CSI bus transfers only pixel data and is designed for extremely high data rates. The camera is supported by the latest version of Raspbian. It is connected to the BCM2835/BCM2836 processor via the CSI bus. This is a higher bandwidth connection that transfers pixel data from the camera back to the processor. The bus runs through the ribbon cable which connects the camera board to the Pi. Areas of application for the Arduino CAM 5 MP CS Pi CamInventorMakersEngineersAmateurAnyone who wants a better picture qualitySecurity systems and/or the Octoprint 3D printer monitorThis text is machine translated.