AT: Tenergy 148V 6000mAh Heavy Duty LIPO Battery Pack w/ PCB Protection
14.8V 6000 mAh Polymer Li-Iontechnology madeof4-cell Polymer Li-Ion cell of 3.7V 6000mAhVoltage14.8v (working) 16.8V ( peak)Capacity6000mAh Max. Discharging rate:6.5Amp with PCB One protective circuit board PCB installed with thebattery packthat limits the discharging current of battery pack to 6 Amp. But protect battery from- Over-chargingcut-off17.4V- Over-dischargingcut-off; 9.6V- Over-drain ( >6.5Amp) - Short circuit and Wrong polarity Light-weighted17 oz.Dimension169mmx 52mm x 30mm 4" (12mm) long prewired and shrink wrappedRecommended charger:Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.If you connect two of these modules in parallel, you can build a 14.8V 12.7 Ah Battery packwith a 14 Amp discharge rate.Applications- HID Bikelight or Dive light - Autonomous submarine - RC Car and RC airplane with greater energy needs - Building external battery packs for Laptop computers or 12V portable devicesCautionImproper use like overcharging and over discharging can cause explosion and/or fire.User of the battery is required tohave the sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.