Ironworking Level 1 Trainee Guide in Spanish (International Version)

Instructor Supplements

Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx.  

·    Annotated Instructor's Guide (AIG) Paperback (Includes access code for Instructor Resource Center) 978-0-13-213715-7

·    TestGen Software and Test Questions - Available for download from  www.nccercontrenirc.com. Access code comes in AIG and also available separately. 

·    Additional TestGen Software Access Code Cards 978-0-13-213796-6

·    PowerPoint® Presentation Slides 978-0-13-213795-9

(Total Level Hours: 235 Hours (includes 72.5 hours of Core Curriculum which is a prerequisite for Level 1 completion and must be purchased separately.))

30101-11 Introduction to the Trade (5 Hours)

Discusses the historical development of the ironworking trade. Explains personal qualities that contribute to successful employment. Describes the organization and purpose of apprenticeship training, and the safety obligations of the employer and employee.

30102-11 Trade Safety (12.5 Hours)

Describes the consequences of on-the-job accidents and the responsibilities of OSHA. Identifies potential ironworker health and safety hazards and safe work practices around cranes. Explains the safe use of personnel lifts. Discusses the safe use and operation of aerial platforms, hoists, and fall protection systems.

30103-11 Tools and Equipment of the Trade (10 Hours)

Identifies and explains commonly used safety tools and equipment. Describes the proper use of common hand tools and power tools. Identifi es power sources for ironworking tools.

30104-11 Fastening (5 Hours)

Explains how to recognize types of bolts, washers, and nuts. Describes the types of bolts and the procedures used with the calibrated wrench and the turn-of-nut tightening methods.

30105-11 Mobile Construction Cranes (10 Hours)

Identifi es and describes common lifting equipment and construction cranes. Describes using crane manuals, performing recordkeeping, and following safety requirements. Describes ANSI signals for cranes. Provides procedures for assembling and disassembling construction cranes.

30106-11 Rigging Equipment (10 Hours)

Describes the use and inspection of basic equipment and hardware used in rigging. Explains common slings and how to determine sling capacities and angles. Covers the selection and inspection of rigging equipment, including block and tackles, chain hoists, come-alongs, jacks, and tuggers. 

30107-11 Rigging Practices (15 Hours)

Identifies the site and environmental hazards associated with rigging. Explains how to attach rigging hardware for routine

lifts and identify the components of a lift plan. Describes how to perform sling tension calculations and determine the weight

of beams and basic weight estimation.

30108-11 Trade Drawings One (12.5 Hours)

Identifies the materials used in steel-framed buildings. Explains how to read basic structural blueprints.

30109-11 Structural Ironworking One (7.5 Hours)

Identifies the types of construction that utilize structural steel, the components of the structures, and the process involved in

erecting a steel structure. Explains the principles of structural stresses and the requirements of bolted connections.

30110-11 Plumbing, Aligning, and Guying (5 Hours)

Describes the purpose and function of aligning and plumbing steel structures, the tools that are used, and the procedures for

performing the plumbing and aligning. Identifies and explains column base and baseplate components and foundation

failures.

29102-09 Oxyfuel Cutting (17.5 Hours; from Welding Level One))

Explains the safety requirements for oxyfuel cutting. Identifies oxyfuel cutting equipment and setup requirements. Explains

how to light, adjust, and shut down oxyfuel equipment. Provides instruction on cutting techniques that include straight

line, piercing, bevels, washing, and gouging.

30112-11 Introduction to Arc Welding (22.5 Hours)

Identifies different welding equipment and processes. Describes the safety precautions associated with arc welding. Explains

how to identify weld joints, their dimensions, and applications from welding symbols and drawings. Instructs the trainee on

how to set up and use SMAW equipment and explains the governing welding codes.

30113-10 Bar Joists and Girders (5 Hours)

Explains how to recognize the various types of bar joists and how they are designated. Describes the proper procedures for rigging and storing steel joints. Explains the use of joist girders in steel joist construction systems and the proper erection procedures for bar joists. Includes OSHA Subpart R. 

30114-10 Metal Decking (10 Hours)

Identifies and explains decking types and profiles and how decking is packaged, shipped, and stored. Describes erecting decking and job-site safety. Discusses the effects of deck penetrations and damage. Includes OSHA Subpart R. 

30115-10 Field Fabrication (15 Hours)

Identifies the safety hazards associated with field fabrication. Describes how to use common layout tools. Explains how to fabricate angle iron, channel, T-shapes, and W-shapes to given dimensions. 

The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.

The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.